TT-25112, TT-40115, and TT-40 Head in Level 1 laquered tweed and logos from the early days
The Tweed Tone Series delivers warm 50's vintage tone with everything you need and nothing you don't. From the singing sustain and compression of the cathode biased versions, to the punch of the fixed biased versions, every serious guitarist needs a Tweed Tone in his gear collection. The amp designations are TT (Tweed Tone)followed by the power output and the speaker combination(TT-80212 would be an 80 watt amp with a 2x12 speaker cabinet etc.) All Fixed/Adjustable bias TT series amps come with a bias potentiometer and bias test jacks for easy bias adjustment. Do not confuse the Collins TT Series with "Kit Amps" being offered by anyone, these are handcrafted amps being assembled from the finest components available as orders are placed.
TT6110 with Weber 10A125 and TT30FB115 with Weber 15A150 played simultaneously in the same amp combo cabinet
Noodle Doodle
Power Output: 6, 18, 25, 30, 40, and 80 watts
Output Tubes: JJ - 6V6 or 6L6/5881
Preamp Tubes: JJ - 12AX7/ECC83, 12AT7/ECC81 or JAN NOS 5751
Rectifier: Tube: 5Y3, 5U4, 5R4, 5V4 or 5AR4/GZ34
Transformers: Crafted in USA to original spec. Power, Choke and Output transformers with fixed or selectable 2/4/8 / 4/8/16 ohm output
Wire: Cloth covered 18, 20 and 22 ga.
Speaker Wire: Vintage cloth braided 16 Ga.
Controls: Quantity depends on model, Vol, Bass Middle Treble, Presence
Bias pot and test points: Standard on Fixed/Adjustable bias models
Configurations: Heads or 1x8, 1x10, 1x12, 2x10, 3x10, 4x10, 2x12 or 1x15 Combos
Two TT-18's and one TT-30FB+ chassis shown above
Chassis: Chrome plated and screen printed CRS
Transformers: Custom wound in the USA
Circuit Board: Handwired G10 epoxy resin board with tinned brass eyelets standard, Vintage phenolic boards available
Capacitors: Sprague atom electrolytics; Sprague Vitamin Q, 715 Orange Drop, Mallory 150 or CDE silver Mica coupling and tone caps.
Resistors: 1/2 to 5 watt metal film, metal oxide and carbon comp(upon request)throughout
Sockets: Ceramic chassis mount
Potentiometers: High friction chassis mount
Switches: Carling
Jacks: Switchcraft
Cabinets: Fingerjointed solid white pine
Configuration: Any speaker combination is available with any amp(TT-6115 Etc.)
Speakers: Any Weber, Jensen, Celestion, or Eminence available
Knobs: Chickenhead in White, Cream, Black, Purple, Green, Red, Blue or Yellow
Logo: Brushed gold, silver, black - oval or rectangle - cabinet or grillcloth mounted
Handles: Vintage style Brown or Black leather strap with chrome mounts or modern style with dog bone mounts
Feet: 1" Rubber or rubber/chrome glides
Speaker Wire: Actual Vintage(not vintage style)cloth covered 16Ga or BlueWave Audio oxygen free 16Ga
Negative Feedback Control: On/Off Switch or potentiometer control
Bias Switching: Cathode / Fixed Adjustable bias settings selectable
Cabinet Finish: The following four options are available, for examples of each visit my recent builds page.
The following are examples of popular configurations, if you need a quote on a specific configuration please ask.
Legend:
CB - Cathode Bias, FB - Fixed Adjustable Bias, V - Volume(2 = normal & bright channel), B - Bass, M - Middle, T - Treble, P - Presence, + - Has a full tone stack with Bass, Middle, Treble and Presence control.
The same bias/tube compliment, wattage and controls apply to combo prices below. Combo prices listed include Jensen Vintage Reissue Speakers are for ** REFERENCE ONLY **. Prices vary based on actual speaker selection for your build.